Super Io Configuration - Supero A1SAi-2550F User Manual

A1SAi & A1SRi Series Motherboard User's Manual
TPM Enabled Status
TPM Active Status
TPM Owner Status

Super IO Configuration


Super IO Chip AST2400

Serial Port 0 Configuration/Serial Port 1 Configuration
This submenu allows the user the configure settings of Serial Port 1 or Serial Port 2.
Serial Port
Select Enabled to enable the a selected onboard serial port. The options are Dis-
abled and Enabled.
Device Settings
This item displays the status of a serial part specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address
of a serial port specified by the user. Select Auto to allow the BIOS to automatically
assign the base I/O and IRQ address.
The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
The options for Serial Port 2 are Auto, (IO=2F8h; IRQ=3), (IO=3F8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12), (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12) and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
Device Mode
Use this feature to set the optimal setting for a super I/O device. The options are
24MHz/13 and 24MHz.
Serial Port 2 Attribute (Available for Serial Port 2 only)
This feature specifies the attribute of Serial Port 2. The options are SOL and COM.
4-24