Table of Contents
Advertisement
A1SAi & A1SRi Series Motherboard User's Manual
2-4
Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Although a chassis may have both plastic and metal mounting fas-
teners, metal ones are highly recommended because they ground the motherboard
to the chassis. Make sure that the metal standoffs click in or are screwed in tightly.
Then use a screwdriver to secure the motherboard onto the motherboard tray.
Tools Needed
Philips Screwdriver
(1)
Location of Mounting Holes
JUIDB1
JI2C1
JI2C2
Battery
JF1
1
SP1
Caution: 1) To avoid damaging the motherboard and its components, please do
not use a force greater than 8 lb/inch on each mounting screw during motherboard
installation. 2) Some components are very close to the mounting holes. Please take
precautionary measures to avoid damaging these components when installing the
motherboard to the chassis.
Philips Screws (4)
VGA
BMC
LAN2/LAN4
A1SAi/A1SRi Series Motherboard
Rev. 1.00
JWD1
J3
USB2.0-0/1
USB3.0-0/1
IPMI_LAN
LAN1/LAN3
Marvell
PHY
BIOS
JBT1
CPU
2-8
Standoffs (4)
Only if Needed
COM1
FAN3
FAN1
Advertisement
Table of Contents
