Unit Identification Led - Supero A1SAi-2550F User Manual

A1SAi & A1SRi Series Motherboard User's Manual

Unit Identification LED

A rear UID LED indicator (LED7) is located
next to the Unit Identifier (UID) switch on the
I/O backplane. The front panel UID LED is
located at pin 7 of the Front Control Panel at
JF1. Connect a cable to pin 7 on JF1 for front
panel UID LED indication. When you press
the UID switch, both rear UID LED and front
panel UID LED Indicators will be turned on.
Press the UID switch again to turn off both
LED Indicators. These UID Indicators provide
easy identification of a system unit that may
be in need of service.
Note: UID can also be triggered via
IPMI on the motherboard. For more
information on IPMI, please refer to
the IPMI User's Guide posted on
our website at http://www.supermi-
cro.com.
A
JUIDB1
VGA
BMC
JI2C1
A1SAi/A1SRi Series Motherboard
Rev. 1.00
JI2C2
Battery
JWD1
JF1
1
J3
SP1
USB2.0-0/1
USB3.0-0/1
LAN2/LAN4 LAN1/LAN3
Marvell
PHY
BIOS
JBT1
CPU
Color/State OS Status
Blue: On
COM1
IPMI_LAN
FAN3
FAN1
2-30
UID LED Status
Windows OS Unit Identified
A. UID LED