Sata Configuration - Supero A1SAi-2550F User Manual

A1SAi & A1SRi Series Motherboard User's Manual
Device Power-up Delay
Use the feature to set the maximum time a USB device will wait before report-
ing itself to the host controller. Select Auto to use the manufacturer's default
setting. Select Manual to set the default setting manually. The options are Auto
and Manual.

SATA Configuration


When this submenu is selected, the AMI BIOS automatically detects the presence
of the SATA Devices and displays the following items:
SATA 3 Controller
This feature allows the user to configure the settings of SATA 3.0 devices
Sata 3 Controller
Select Enabled to enable the onboard SATA 3.0 controller. The options are Enabled
and Disabled.
Sata Mode
This item sets SATA device mode. The options are IDE and AHCI.
Sata 3 Speed
Use this feature to select the highest allowable speed for the SATA 3.0 controller.
The options are Gen 1, Gen 2, and Gen3.
LPM (Link Power Management)
Select Enabled to support Link Power Management to improve system power
management. The options are Enabled and Disabled.
Overwrite SIR Values
Select Enabled to overwrite SIR values. The options are Disabled and Enabled.
If Overwrite SIR Values is set to Enabled, the three items below are available
for configuration:
Hex value of LBC01
Use this feature to select the hex value for LBC01. Use the keypad to enter a
value.
Hex value of LBC23
Use this feature to select the hex value for LBC23. Use the keypad to enter a
value.
4-18