Table of Contents
Advertisement
1-3
Special Features
Recovery from AC Power Loss
Basic I/O System (BIOS) provides a setting for you to determine how the system will
respond when AC power is lost and then restored to the system. You can choose
for the system to remain powered off, (in which case you must press the power
switch to turn it back on), or for it to automatically return to a power-on state. See
the Advanced BIOS Setup section to change this setting. The default setting is
Last State.
1-4
PC Health Monitoring
This section describes the PC health monitoring features of the board. All have
an onboard System Hardware Monitoring chip that supports PC health monitoring.
An onboard voltage monitor will scan these onboard voltages continuously: VCCP,
VDIMM, 12V, 5VCC, 3.3VCC, VBAT, 5V, Dual, and 3.3V AUX. Once a voltage be-
comes unstable, a warning is given, or an error message is sent to the screen. The
user can adjust the voltage thresholds to define the sensitivity of the voltage monitor.
Environmental Temperature Control
This motherboard comes with a built-in passive heatsink. Please follow the instruc-
tions given in your system design guide or your system user manual to provide
proper/adequate airflow to your system. The onboard BaseBoard Management
Controller (BMC) monitors CPU, memory and motherboard environment tempera-
tures for fan control and PC health management.
Note: To avoid possible system overheating, please be sure to provide
adequate airflow to your system.
System Resource Alert
This feature is available when the system is used with SuperDoctor ® 5 in the
Windows OS environment or used with SuperDoctor II in Linux. SuperDoctor
is used to notify the user of certain system events. For example, you can also
configure SuperDoctor to provide you with warnings when the system temperature,
CPU temperatures, voltages and fan speeds go beyond predefined thresholds.
1-11
Chapter 1: Introduction
Advertisement
Table of Contents
