Maintenance; Care And Cleaning; Battery Replacement - Honeywell Lyric LCP300-LC User Reference Manual

The Gateway is designed to require little maintenance. However, testing your system is strongly
recommended, and regular cleaning is suggested.
• Test the system weekly.
• Test your system after any alarm occurs.

Care and Cleaning

• Do not slam sensor-protected doors or windows.
• Keep dust from accumulating on the Gateway and sensors, particularly motion sensors and
smoke or carbon monoxide detectors.
• The Gateway and sensors should be cleaned carefully with a soft, dry cloth. Do not clean
the components with water or any other liquids.

Battery Replacement

Home > Security > Tools > Advanced > Install Backup Battery
Replace the battery pack when the Security menu displays Low Battery with no
zone number specified.
Use only batteries recommended by the installer or the manufacturer.
Disarm the system before changing the Gateway's battery pack.
Remember that you must enter the Master User code for access to the Tools menu.
Gateway
1. On the MyHome Gateway App, navigate to the Advanced menu and select Install
Backup Battery. A confirmation request appears; press Yes and leave the battery
installation procedure screen open.
2. If mounted on a wall, remove the screw from the rear cover and separate the Gateway
from the rear cover.
3. If using a desk stand, remove the desk stand from the back of the Gateway, then
remove the bottom screw and separate the Gateway from the rear cover.
4. Unplug the power cord (and Ethernet cable, if used) from the back of the Gateway.

Maintenance

See Testing Your System
IMPORTANT
48
for more information.