Event Log Codes - Honeywell Lyric LCP300-LC User Reference Manual

The Gateway's Event Log can record and display as many as 6000 system events. Events are stored
locally in the Gateway, in chronological order and sent to your monitoring company as needed.
When the maximum number of stored events is reached, the oldest 2000 entries are deleted to
make room for logging new events.
The Event log, viewed from the MyHome Gateway App, provides a description of the event and an
event code. The tables below provide definitions of the events/codes that may be transmitted to
the Central Station and/or displayed by the MyHome Gateway App. ("E" Codes indicate an Event
and "R" codes indicate the event was Restored.)
NOTE: If the Gateway's backup battery is exhausted after AC power is lost, any system activity
occurring after Low Battery notification is not saved. Additionally, the Gateway reverts to the status
condition as before the low battery notification.
Event Code
110 Alarm, Fire
121 Alarm, Duress
122 Alarm, Silent
123 Alarm, Audible
131 Alarm, Perimeter
132 Alarm, Interior
134 Alarm, Entry/Exit
135 Alarm, Day/Night
137 Alarm, Tamper
145 Expansion Module Tamper
146 Silent Burglary
150 24-Hour Non-Burglary
162 Carbon Monoxide Detected
301 Trouble, AC Loss
302 Trouble, Low System Battery
305 Trouble, System Reset
308 System shutdown
316 System Tamper*
341 Trouble, Case Tamper
344 Trouble, RF Receiver Jam Detect
350 Long Range Radio Reset
353 Trouble, Long Range Radio Transmitter Fault
354 Failure to Communicate Event
373 Trouble, Fire Trouble
374 Trouble, Exit Error Alarm
380 Trouble, Sensor
381 Trouble, Loss of Supervision RF
383 Trouble, Sensor Tamper
Continued next page

Event Log Codes

Event Log Codes
Definition
52
Event Log Display
Fire
Duress
Silent
Audible
Perimeter
Interior
Entry/Exit
Day Night
Tamper
Expansion Module Tamper
Silent Burglary
24 Hour Non-Burglary
Carbon Monoxide Detected
AC Loss
Low system battery
System Reset
System shutdown
System Tamper
Cover Tamper
RF Jam Detect
Long Range Radio Reset
Comm. Trouble
Failure to Communicate Event
Fire trouble
Exit error alarm
Sensor trouble
Superv Loss-RF
Sensor Tamper