Disarming The System; User Code Error (Touchpad Lockout); Bypassing Protection Zones - Honeywell Lyric LCP300-LC User Reference Manual

Smart controller
Hide thumbs Also See for Lyric LCP300-LC:
Table of Contents

Advertisement

Disarming the System

Security > Disarm
NOTE: Disarming the system also silences audible alarms and trouble alerts.
To disarm your security system:
The system beeps and announces "Disarmed", followed by alerts about system readiness,
if any.
A "Check system" announcement indicates a faulted sensor or problems in the Gateway
itself.
In most situations, if a valid user code is not entered within 30 seconds of pressing Disarm, the
Home screen reappears, and the system remains armed.
NOTES: • If a valid code is not entered by the time the entry delay ends, an alarm occurs.
• The Guest code and the Installer code can only disarm the system if that code was
used to arm the system. If the Quick Arm option has been used, neither the Guest
Code nor Installer Code can disarm the system.

User Code Error (Touchpad Lockout)

When the screen displays User Code Error, it means too many invalid user codes have been
entered. The system will not accept additional user code entries for 15 minutes (lockout period).

Bypassing Protection Zones

Any zones with faults must be cleared before arming the system.
Bypass allows arming the system while intentionally leaving selected zones unprotected.
Bypassed zones will not trigger an alarm.
To Bypass zones:
1.
Before arming the system, press Zones on the Security menu. A list of your system's
zones appears. Faulted (open) zones are shown in
To choose which zone list to view (All, Alarm, Trouble, Fault or Bypassed zones), press
Select on the bottom, right of the screen.
Use the up and down arrows to scroll through the list of zones.
2. Select the zone(s) to be bypassed.
3. Press BYPASS and enter a user code.
If programmed, you can select BYPASS FAULTED and enter a user code. This selects and
bypasses all zones with faults or other issues.
A Bypass icon [
4. Arm the system as usual.
NOTES: • Fire and Carbon Monoxide (CO) and Emergency zones cannot be bypassed.
• Bypassed zones are automatically un-bypassed when the system is disarmed.
Press Clear Bypass to un-bypass any previously bypassed zones.
] appears on Bypassed zones on the zone lists.
20
red
or orange.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lyric lcp300-lLcp300-lLcp300-lc

Table of Contents