Chimes/Voice Annunciations - Honeywell Lyric LCP300-LC User Reference Manual

Clearing Alarms
After an alarm is canceled, the MyHome Gateway App continues to display zone information
associated with the alarm (this feature is known as Memory of Alarm).
To clear memory of alarm, press Disarm and enter the user code again.
Memory of alarm can also be dismissed with these steps:
1. Cancel and silence the alarm as above.
2. Press Zones on the Security menu. The zone number associated with the type of
alarm appears.
3. Press CLEAR ALARMS and enter a user code.
4. Press  to return to the Security menu or press the Home button.
NOTE: If any Emergency is canceled and cleared before a report is sent, an alarm will not be
sent to the monitoring company.

Chimes/Voice Annunciations

The Chime feature is intended for convenience and is not intended for life safety
purposes or pool alarm and does not meet the requirements of UL 2017.
Volume/Mute
Home > Settings
Gateway can be set to give audible notifications when a protected zone opens while the
system is disarmed.
On the Settings screen:
1. Select CHIME and PANEL VOICE to enable chime sounds and voice annunciations.
De-select PANEL VOICE for chime sounds only.
De-select CHIME to mute these audible notifications.
2. Adjust Panel Volume with the slider.
3. Press Save.
NOTES: • The system must be disarmed to change chime and voice settings.
• Voice annunciations are controlled by enabling or disabling CHIME.
• Voice annunciations should not be confused with Gateway's Two-Way Voice
(Audio Alarm
• With Chime enabled, the Gateway sounds a selectable tone when a protected
zone is opened. See Selectable Chime Sounds below.
IMPORTANT
Verification) feature.
23