Hold / Run / Show - Honeywell Lyric LCP300-LC User Reference Manual

g. Select New Action to define the response when the triggering event occurs.
NOTE: The 24 Hour Silent Alarm or 24 Hour Auxiliary Alarm Zone types will not
trigger the selected Smart Scene if the Any Burglary Alarm option is programmed.
9. New Action defines the response when the triggering event occurs. This includes users
manually running Anytime Smart Scenes, the time of Scheduled Smart Scenes and the
conditions for Triggered Smart Scenes. You can choose both Security and automation
device responses. The Security choices are:
• Arm the system in Away mode.
• Arm the system in Home mode.
• Disarm the system.
a. After choosing a Security setting, press  and then Save.
b. If you choose to work with Devices, a list of the system's automation devices appears.
c. Select one or more devices and set the device's desired operation. (For example,
set switches to on or off, or locks to locked or unlocked.)
d. After adding a device and its desired operation to the Smart Scene, press Save.
Other available devices are displayed again so that they can be added to the Smart
Scene.
NOTE: In most situations, specific Security and Device information is displayed by
pressing the Down arrow.
10. Press Save.
11. Press  to return to the Smart Scenes menu.

Hold / Run / Show

These controls allow you to pause, preview/execute and review Smart Scenes from the MyHome
Gateway App.
NOTE: You can use the Hold, Run and Show functions from the MyHome Gateway App, even
when set up with Total Connect remote services.
Hold
Hold allows Scheduled and Triggered Smart Scenes to be temporarily suspended.
A Scheduled Smart Scene can be put on Hold before programmed operations take place.
1. Select a Scheduled or Triggered Smart Scene.
2. Press Hold. The button is highlighted, and programmed operation will not take place.
To remove a Hold:
1. On the Smart Scenes menu, enter a user code with access to the desired Smart Scene.
2. Select the Smart Scene and un-highlight Hold. Programmed operation resumes.
Run
Smart Scenes can be manually started with the Run button. The Smart Scene's results are
displayed when the programmed operations have been performed.
NOTE: The Run option can be used to check the outcomes of Scheduled Smart Scenes and
Triggered Smart Scenes, regardless of programmed triggers.
1. Select the Smart Scene.
2. Press Run. The system performs the programmed operations and the results are displayed.
Successful operations are displayed with device information and a check mark. Failed
operations are displayed with an empty circle.
Show (Review)
Use the Show button to see the programmed details of a Smart Scene without running it.
1. Select the Smart Scene.
2. Press Show. The scene's category, authorized users and included devices are displayed.
38