Honeywell Lyric LCP300-LC User Reference Manual page 18

Arming states include
Arm Away
Arm Home
Arm Custom
Bypass
Arm Night
Instant For times when Entry/Exit doors are not expected to open at all.
Entry Delay is eliminated. When the system is armed, an alarm occurs
immediately if an exterior door is opened.
Quick Arm Used to arm the system in any mode without entering a user code, if programmed.
NOTE:
Auto Home If you arm the system in the "Away" mode but no one exits, the alarm system
automatically changes to the "Home" mode. This helps to prevent unwanted
alarms when someone remains on the premises. Disarm the system and Arm
Away again when you are ready to leave. This option is enabled by your
installer.
Arm Away
Security > Arm Away
By default, this mode's exit delay countdown is accompanied by a beeping sound.
• The system beeps twice and announces "Armed Away; exit now". The exit delay
countdown begins.
• Press Restart Timer if you need more time to leave.
• Leave the premises and close the door before the countdown ends.
• The system arms in Away mode. (Door and window sensors and interior motion sensors
are active.)
For times when no one is home; protects all perimeter (doors and
windows) and interior zones.
For times when the house is occupied; protects only perimeter zones.
Arms the system with pre-selected zones bypassed.
This feature allows you to arm the system while intentionally leaving
selected zones unprotected.
For times when the house is occupied; protects perimeter zones and
selected interior motion sensors if used. Other interior zones are
unprotected. Enabled by your installer and only used with interior motion
sensors.
A user code is always needed to disarm the system.
For a silent exit, press Silent Exit first.
18