Download Print this page

Honeywell LKS 160 Product Handbook

Actuator for air dampers on multi-stage and modulating burners
Hide thumbs

Advertisement

Quick Links

FOR AIR DAMPERS ON MULTI-STAGE AND
APPLICATION
The LKS 160 air damper actuator is designed to be fitted to
multi-stage or modulating oil and gas burners with fully
closed position.
Description ................................................................. 2
Features ...................................................................... 2
Specification ............................................................... 3
Dimensional drawings ................................................ 5
Installation and final checkout .................................... 6
Citrcuit diagrams ........................................................ 7
Standards and approvals ........................................... 9
Ordering information .................................................. 9
Accessories ................................................................ 9
1
ACTUATOR
LKS 160
MODULATING BURNERS
PRODUCT HANDBOOK
CONTENTS
EN2C-0112SZ20 R0202

Advertisement

loading

  Related Manuals for Honeywell LKS 160

  Summary of Contents for Honeywell LKS 160

  • Page 1: Table Of Contents

    LKS 160 FOR AIR DAMPERS ON MULTI-STAGE AND MODULATING BURNERS PRODUCT HANDBOOK APPLICATION The LKS 160 air damper actuator is designed to be fitted to multi-stage or modulating oil and gas burners with fully closed position. CONTENTS GENERAL Description ..............2 Features ..............
  • Page 2: General

    GENERAL DESCRIPTION A synchronous motor powers a drive shaft and a backlash- can be adjusted steplessly within the operating range using free cam shaft via a gear reducer. the associated cam disc. Manually adjustable lever-operated cams or spindle-driven cams, which can be adjusted with a The cam shaft operates limit and auxiliary switches.
  • Page 3: Technical Data

    Diagram Shaft Drive Load torque Holding Voltage Type Remarks time torque LKS 160-01 A 5-5 S1 standard version LKS 160-03 A 5-5 S2 standard version LKS 160-07 A 5-12 S1 LKS 160-09 A 5-5 S1 Spindle-driven cam LKS 160-22 A 5-30 S7 S7.1...
  • Page 4 Load torque Holding Voltage Type Remarks time torque LKS 160-02 B 5-5 S1 standard version LKS 160-04 B 5-5 S2 standard version LKS 160-08 B 5-3 S2 LKS 160-10 B 5-5 S1 LKS 160-12 B 5-3 S2 LKS 160-18 B 5-5 S2 S2.1...
  • Page 5: Dimensional Drawings

    Protection Limit and auxiliary switches • • IP 44, assuming appropriate cable entries and screw max. 7 fastening (DIN 40050) operation with adjustable cam discs, cams coloured in normal way: Cable entries blue fully closed position orange low load • 2 x PG9 high load Cable connection black...
  • Page 6: Installation And Operation

    INSTALLATION AND OPERATION INSTALLATION AND FINAL CHECKOUT • The regulations and standards applicable in each • Disconnect the actuators completely from the particular case must be observed. power supply when working close to terminals and connections. • Installation and commissioning must only be carried out by qualified technicians.
  • Page 7: Citrcuit Diagrams

    CIRCUIT DIAGRAMS S2.1 S4.9 EN2C-0112SZ20 R0202...
  • Page 8 CIRCUIT DIAGRAMS S8.P S8.P1 EN2C-0112SZ20 R0202...
  • Page 9: Various

    EN 60730 – 1 : 1991 A1 and A11 : 1991 EN 60730 – 2 – 5 : 1991 ORDERING INFORMATION Not for creation of new type LKS 160-09 B 5 - 30 S3.P1.1 Circuit version Drive time for 90° 3s (1,5 Nm)
  • Page 10 Honeywell Burner & Boiler Control Europe Satronic AG Honeywell-Platz 1 CH-8157 Dielsdorf Switzerland Phone +41 1 855 22 11 +41 1 855 22 22 EN2C-0112SZ20 R0202...