Honeywell Lyric LCP300-LC User Reference Manual page 19

Arm Home
Security > Arm Home
By default, this mode's exit delay countdown is silent.
•
The system beeps three times and announces "Armed Home; exit now". The exit delay
countdown begins.
• Press Restart Timer if you need more time to leave.
• The system arms in Home mode. Door and window sensors are active, but interior motion
sensors are not active.
Arm Custom
Security > Arm Custom
Use this option to pre-set zones for bypass when arming the system. You can also enable or
disable the entry delay.
1. Select Arm Custom to display a list of zones.
2. Select the zones you wish to bypass when arming the system.
3. Select Arm Custom on the zone list screen.
4. A numerical keypad appears.
Select Entry Delay if desired. (See
5. Arm the system by entering a user code.
6. The exit delay countdown begins.
7. If leaving, leave the premises and close the door.
Bypassed zones are left unprotected.
NOTE: The next time Arm Custom is used, the same zones that were previously
selected are highlighted on the zone list screen. If desired, select different zones for
custom arming.
Instant Mode
Security > Arm Custom
In Instant mode, an alarm occurs immediately when a protected Entry/Exit is opened. There is
no Entry delay during which a code can be entered to disarm the system.
1. Select Arm Custom to display the zone list screen.
2. If any zones have been previously set for bypass, deselect them.
3. Press Arm Custom.
4. When the keypad appears, de-select Entry Delay.
5. Enter a user code to arm the system and leave the premises during exit delay.
Arm Night
Security > Arm Home
Arm Night
must be enabled by your security installer.
1. Select Arm Home to display the keypad.
2. Select Arm Night and then enter a user code.
3. The system beeps and announces "Armed Night Home mode". Exit delay begins.
Press Restart Timer if you need more time to leave.
4. The system arms in Arm Night mode. Doors and windows and pre-selected interior
zones are active.
Instant Mode for more about disabling Entry Delay.)
19