Honeywell Lyric LCP300-LC User Reference Manual page 36

Creating Smart Scenes using the MyHome Gateway App
6. Select Anytime. These options appear:
• Name
• Action Type
• Who can run this Smart Scene? (User type)
• New Action
a. Press New Action to define the system's response when the Smart Scene is
triggered.
b. When settings are complete, press  until the Smart Scene appears with its name
displayed.
c. Press Save. Press  to return to the main Smart Scenes menu.
7. Select Scheduled.
a. Select the type of user who can run the Smart Scene.
b. Select Scheduled to display clock and calendar settings.
c. Set a time when the Smart Scene will start. Be sure to specify AM or PM.
You can select Sunrise or Sunset instead of setting a time on the clock. Selecting
Sunrise or Sunset overrides the clock controls.
NOTE that updated Sunrise and Sunset times may depend on the system's connection
to the internet or cellular phone network. Ask your installer for more information.
d. Set the days of the week for the Smart Scene to take place.
e. Press Save. The schedule settings are displayed.
f. Press New Action to define the response when the scheduled time occurs (see Step 8).
g. Press  to return to the Smart Scenes menu.
8. Select Triggered Action. These options appear:
Smart Scenes can be started by one or a combination of the following options:
• Event Zone Type
• Restore Zone Type
• Trigger
• System Operation
NOTE: Event Zone Type, Restore Zone Type and Trigger can be different kinds of
conditions.
For example, a given Smart Scene can be triggered by a Fire alarm OR by an
Entry/Exit event. Smart Scenes can also be triggered by Trouble conditions
(Trouble as the Trigger in one of the system's zones).
Device-related events (such as Light On, Light Off, Door Locked, Door
Unlocked) set the button at right to Device. Choices depend on the devices
installed in your system.
(Continued)
36