Dmx Lost; Lock - Chroma Color Force II 12 User Manual

10.7 DMX Lost

If DMX is not detected various output options can be selected in this mode:
To set DMX Lost action;
1. On the Main Menu, tap Setup Menu
2. On the Setup screen, tap DMX Lost
3. On the When DMX Lost screen, select and tap an output option, then tap Apply to save
Note: If a Look is selected for playback when DMX is lost, the unit will playback the selected look on
power up, so long as DMX is not present.

10.8 Lock

Factory default sets the display screen to turn off and lock when untouched for 30 seconds. A lock symbol appears on the screen
when touched. This feature provides protection against accidental user input.
If the Lock feature is enabled, just touch and hold the lock icon and hold for a few seconds to unlock.
To disable or enable the lock,
1. On the Main Menu, tap Setup Menu
2.
On the Setup screen, tap Lock
3.
On the Lock Future screen, tap Enable or Disable, then tap Apply to save
TM
Chroma-Q Color Force II User Manual
No Output will snap to off
Last data will hold the last valid DMX state
Look 1-31 will snap to the Look of your choice
Display Lock Icon
Note: The Lock Icon turns
green when tapped
www.chroma-q.com
16
Version 1.1a