Cf I Matching; Etc Compatible; Dmx Data - Chroma Color Force II 12 User Manual

10.1 CF I Matching

This feature allows side-by-side mixing of the original Color Force
TM
Color Force II to match Color Force

10.2 ETC Compatible

Color output of the Color Force II

10.3 DMX Data

This option allows user to see the DMX channel intensities being received by the fixture. This display will be formatted based on
selected mode and grouping. The values read from 0 to 99 (as full).
Current assigned address
To show DMX Data,
1. On the Main Menu, tap SETUP
2. Then tap DMX Data
3. The display shows the DMX start channel and the values (0-99) of the DMX channels
4. Tap Escape to go to back
TM
Chroma-Q Color Force II
TM
, so they are visually similar at the same DMX values.
TM
fixture can be set to match the Color Picker feature in the ETC Eos consoles.
Tap to enable the compatibility mode then press Apply
www.chroma-q.com
User Manual
TM TM
and Color Force II . Enabling this option reduces the intensity of
Tap to enable the matching mode then press Apply
14
Individual Channel
Intensities
Version 1.1a