10.10 Upload Engine
RECOMMENDED ONLY FOR QUALIFIED PERSONNEL.
LED Engine software can be uploaded to the fixture from the Chroma-Q Uploader II by accessing this menu. See Quick
Start Guide of the Chroma-Q Uploader II.
Software for LED engines must be uploaded to the Color Force II
1.
In "Setup", select "Upload Engines" then press Enter, and the display shows "Ready"
2.
Connect an XLR 5-pin cable from the Uploader to the unit
3.
Power-up the Uploader - display shows the file name, and "Ready"
4.
Press the "ERASE TARGET" button once to clear the target firmware
5.
Press the "Start Uploading" button once to execute the uploading
6.
An animated progress is displayed on the Uploader and CF unit indicating the upload process
7.
"UPLOADING DONE" appears on the Uploader upon completion of a successful upload and the target device
resets to the Main Menu
8.
Power-cycle the unit
Note that the Chroma-Q Uploader II must be purchased separately.
10.11 FW Version
This option displays current software version of fixture at address Header. For added versatility, Individual
firmware versions of all the engines are also displayed.
10.12 DMX Source
This enables the input connection.
Select the DMX source and press Apply.
10.13 Engine Temp
Tap on this to see individual temperature in degrees Celsius of each engine in the fixture. Each engine drive two
cells.
TM
Chroma-Q Color Force II
User Manual
TM
INPUT CABLE
WIRELESS
www.chroma-q.com
18
using the Chroma-Q Uploader II
DMX from console via cable
Lumen Radio input
Version 1.1a