Flip Options; Strobe Options - Chroma Color Force II 12 User Manual

TM
Color Force II 12 LR
Group
Group Number(s)
Selected
x4 1 1 1
x2 1 1 2
x1 1 2 3
Od/Ev 1 2 1
9.3

Flip Options

The starting DMX address can be selected to be on the right or left of the fixture as indicated on the display. "Left" is defined as the
side where the power & data enter the fixture, "right" is the side where power and data exit. Shown below is the example of address
ordering for a Color Force II
LR 1 2 3
RL 24 23 22
9.4

Strobe Options

These options allow LED's to flash at different frequency, duration and density depending on the selection and application requirements.
All these factors can be varied using a DMX console. Current mode on Main Screen will display sRGBA or sRGB / sHSI, where the "s"
indicates a Strobe function is ON. Multiple strobe options can be selected at the same time.
OFF: Select this and the Press Apply to disable strobe option.
Strobe On: Press this button and then select Apply to enable strobe options. This will add 2 control channels at the beginning of the
current channel footprint; first channel for flash frequency and second channel for flash duration. This setting will be indicated on Main
menu touch screen.
ON TOP: Selecting Strobe On with On Top option will add 5 or 6 channels at the beginning of the fixture DMX footprint based on current
mode selected. For RGBA – 6 extra channels and for RGB/HSI – 5 extra channels as follows: flash, frequency, flash duration, On Top
strobe color. On Top color will be 3 or 4 channels depending on control mode.
RANDOM: Choosing this option LED's flashing frequency and duration can be randomized allowing unit to have a base color with strobe
enabled adding another 1 extra channel for density (how may pixels are flashed at a time). Lowest density value is 1, highest is all 24
pixels.
TM
Chroma-Q Color Force II
Group DMX address examples:
Group 1: Fixture DMX address
Group 2: Fixture DMX address + 4 (RGBA) or +3 (RGB or HSI)
Group 3: Fixture DMX address + 8 (RGBA) or +6 (RGB or HSI)
1
. . .
2
Group X: Fixture DMX address + (X - 1) x 4 (RGBA) or + (X - 1) x 3 (RGB or HSI)
4
. . .
2
Group 24: Fixture DMX address + 92 (RGBA) or + 69 (RGB or HSI)
TM
72 with x1 Grouping selected.
4 5 6 7 8 9
21 20 19 18 17 16
www.chroma-q.com
User Manual
10 11 12 13 14 15
12 14 13 12 11 10
9
16 17 18 19 20 21 22 23 24
9 8 7 6 5 4 3
Version 1.1a
2 1