Setup Menu - Chroma Color Force II 12 User Manual

10. Set up Menu
TM
Color Force II technical operation can be changed and viewed using the Setup menu options.
Command Description
CF One Reduces the intensity of CF II to match the original Color Force.
ETC Comp Fixture can be set for compatibility with the ETC Color Picker when using ETC consoles.
DMX Data Displays the incoming DMX levels for the assigned channels.
Fan Speed 4 Fan Speed options are accessed through the Fan Speed screen:
Quiet – internal fan is off. (Intensity reduced to 80%)
Studio – internal fan is at low speed.
Live – internal fan is on.
Live-Quiet – internal fan is automatically switched on when light output is on and
automatically switched off when light output is off.
Rotate Disp This button rotates the orientation of the Touch Screen Display 180 degrees
Frequency
Frequency options are viewed and selected using the PWM Frequency screen:
750 Hz, 1500 Hz, 3000Hz, 6000 Hz, 12000Hz, 24000Hz.
DMX Lost The fixture can be set with 3 options when DMX data is lost:
Last data – holds the last valid DMX state
No Output – the fixture switches to off
Look – select a prerecorded Look to execute
Lock The Touch Screen Display can be set to lock or unlock in the Lock Future screen.
Reset Reset Settings options are accessed through the Reset Setting screen:
Default – Factory default settings
User – User defined settings
Upload ENG The fixture can be set for light engine software uploads through this screen.
FW Version Displays current software version.
DMX Source Displays current DMX source – cable or wireless
Eng Temp Tells LIVE value for temperature of all the engines in fixture.
Escape Exit the screen without saving
TM
Chroma-Q Color Force II User Manual
www.chroma-q.com
13
Version 1.1a