Connecting Using A Modem - Mircom TX3 Series Configurator Quick Start

Connecting Using a Modem

The modem on the entry panel lets you establish a connection from your
computer to the entry panel using the telephone network.
To establish a modem connection
1. Connect the dedicated telephone line at the Entry Panel to one of the
telephone jack connectors on the TX3-MDM Modem board.
2. Connect the modem on your PC to a standard telephone line.
3. Click Network. The Network Configuration window appears.
4. Select Modem from the PC connection list. The Modem window
appears.
5. Enter the required parameters as explained below:
Modem. Select a modem currently configured into the PC.
Note: The TX3 system is compatible with the TrendNet TFM-560U
High Speed USB 2.0 Fax Modem, the Hiro H50113 56K V.92
USB Fax Modem, and the StarTech USB56KEM2 56k V.92
USB Fax Modem.
10 LT-973