Software Setup - Matrox EpicA Series User Manual

Software setup

This section describes how to install Matrox software for Windows 2000/XP/XPe and Windows Server
2003. For the Linux operating system, see the documentation included with your Linux software
package.
You may need administrator rights to install certain software. For more information, see Windows
documentation or contact your system administrator.
Software overview
Client-side software
"
Matrox PowerDesk-SE
and display drivers for
EpicA
"
Matrox PowerSpace
(optional)
Supported OS
"
Microsoft Windows
2000/XP/XPe
"
Linux
Client-side hardware
"
Matrox EpicA
Client-side software setup
Download your Matrox software package
1
Download the latest client-side software package for your Epic
Web site (www.matrox.com/graphics/en/finent/products/epica/drivers_software.php). Your
software package includes Matrox display drivers and Matrox PowerDesk software.
To run Matrox PowerSpace locally on the client side, download Matrox PowerSpace from the
Matrox Web site (www.matrox.com/graphics/support/drivers).
Install your software package
2
Windows detects new hardware when you restart. If Matrox display drivers haven't been
previously installed, Windows prompts you to install a display driver. Click
the software package you downloaded.
Supported remote protocols
"
Microsoft RDP
"
Linux rDesktop
"
Citrix ICA (Windows only)
Server-side software
"
Matrox PowerDesk EpicA
"
Matrox PowerSpace
EpicA (optional)
Supported OS
"
Microsoft Windows XP
and Windows Server
2000/2003
product from the Matrox
A
Cancel
Matrox EpicA Series – User Guide 11
, then run