Software Setup - Matrox G450 MMS User Manual

Software setup

If a TV or video recorder is connected to your Matrox product, you can use TV output mode to view
or record your display on your TV or video recorder. (To connect video devices to your computer,
page 14.)
TV settings have lower resolutions and refresh rates than typical computer monitor settings. Lower
refresh rates may result in more noticeable flicker.
Note:
America and Japan, among other places. The PAL standard is used in most of Western
Europe and in China, among other places.
If an incorrect TV standard is selected in Matrox software, the output from your computer
may not appear or record properly on your TV or your video recorder. To find out what
standard your TV or video recorder supports, see its documentation.
Windows 2000/XP – To adjust TV settings, access the Matrox PowerDesk
sheet (see "Accessing PowerDesk property sheets", page
Two TV standards are supported for TV output. The NTSC standard is used in North
DualHead
9).
Matrox G450 MMS – User Guide 17
see
property