Table of Contents
Advertisement
•
With the handset on-hook, enter the desired number using the keypad.
Press
,
To place a call using the headset:
Do one of the following:
•
With the optional headset connected, press
Press the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press
,
•
With the optional headset connected, press
Enter the desired number using the keypad.
Press
,
The SIP-T42G IP phone can handle multiple calls at a time. However, only one active call (the call that has audio
associated with it) can be in progress at any time, other calls are placed on hold. The SIP-T42G IP phone can
handle a maximum of 12 calls at one time.
To place multiple calls:
You can have more than one call on your SIP-T42G IP phone. To place a new call during an active call, do one of
the following:
•
Press the line key. The active call is placed on hold.
Enter the desired number using the keypad.
Press
,
•
Press the Hold soft key to place the original call on hold.
Press the New Call soft key.
Enter the desired number using the keypad.
Press
,
You can press
or
call.
Answering Calls
When you are not in another call, you can answer a call in one of three ways:
•
Using the handset
•
Using the speakerphone
•
Using the headset
User Guide for SIP-T42G IP Phone
,
or the Send soft key.
, or the Send soft key.
, or the Send soft key.
, or the Send soft key.
, or the Send soft key.
to switch between calls, and then press the Resume soft key to retrieve the desired
to activate the headset mode.
to activate the headset mode.
36
Advertisement
Table of Contents
