Table of Contents
Advertisement
•
Press the Directory soft key, and then select Local Directory. Select the desired group and search
for the contact (Directory should be configured in advance).
•
Press the Directory soft key, and then select History. Select the desired list and then press
to select the entry (Directory should be configured in advance).
•
Press the Directory soft key, and then select Remote Phone Book. Select the desired group and
search for the contact (Directory should be configured in advance).
3.
Press
or
4.
Press the Tran soft key to complete the transfer when receiving ring back.
To perform an attended transfer:
1.
Press the Tran soft key during a call.
2.
Do one of the following:
•
Enter the number you want to transfer the call to.
•
Press the Directory soft key, and then select Local Directory. Select the desired group and search
for the contact (Directory should be configured in advance).
•
Press the Directory soft key, and then select History. Select the desired list and then press
to select the entry (Directory should be configured in advance).
3.
Press
or
4.
After the party answers the call, press the Tran soft key to complete the transfer.
If you are using a handset, the transfer can be completed by hanging up the handset. You can cancel the transfer
before the call is connected by pressing the Cancel soft key.
Call Waiting
You can enable or disable call waiting on the phone. If call waiting is enabled, you can receive another call while
there is already an active call on the phone. Otherwise, another incoming call is automatically rejected by the
phone with a busy message when there is an active call on the phone. You can also enable or disable the phone
to play a warning tone when receiving another call.
To configure call waiting via phone user interface:
1.
Press Menu->Features->Call Waiting.
2.
Press
or
User Guide for SIP-T42G IP Phone
to dial out.
to dial out.
, or the Switch soft key to select Enabled from the Call Waiting field.
or
or
48
Advertisement
Table of Contents
