Table of Contents
Advertisement
3.
Enter the desired time (in seconds) in the Redial Interval field.
The default value is ―10.
4.
Enter the desired number of redial attempts in the Redial Times field.
The default value is ―10.
5.
Press the Save soft key to accept the change or the Back soft key to cancel.
To use auto redial:
When the called party is busy, the following prompt will appear on the LCD screen of the phone:
1.
Press the OK soft key to activate auto redial.
The LCD screen prompts the following:
2.
Wait for the designated period of time or press the OK soft key to redial the phone number.
The phone will retry as many times as configured until the called party is idle.
Call Mute
You can mute the microphone of the active audio device during an active call so that the other party cannot hear
you. Call mute applies to all modes (Handset, Headset and Speakerphone).
To mute a call:
1.
Press
during an active call.
The LCD screen indicates that the call is now muted. The mute key
LED illuminates solid red when the call is muted.
User Guide for SIP-T42G IP Phone
40
Advertisement
Table of Contents
