Yealink SIP-T42G User Manual page 46

2) Enter the destination number you want to forward all unanswered incoming calls to in the Forward
to field.
3) Press or
After Ring Time field.
The default ring time is 12 seconds.
4) (Optional.) Enter the no answer forward on code or off code respectively in the On Code or Off Code
field.
You can also enable no answer forward for all accounts. After no answer forward was enabled for a
specific account, do the following:
1) Press or
2) Press the All Lines soft key.
The LCD screen prompts ―Copy to all lines?.
3) Press the OK soft key to accept the change or the Cancel soft key to cancel.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
If you activate call forward for the default account, the associated line icon will change to
will appear on the status bar.
If you activate call forward for the non-default account, only the associated line icon will change to
Note Call forward is local to the phone, and may be overridden by the server settings. Call forward
on code or off code may be different between servers. For more information, contact your
system administrator.
To disable call forward in phone mode:
1. Press Menu->Features->Call Forward.
2. Press or
3. Press or
4. Press the Save soft key to accept the change.
User Guide for SIP-T42G IP Phone
, or the Switch soft key to select the ring time to wait before forwarding from the
to highlight the No Answer Forward field.
to select the desired forwarding type and then press the Enter soft key.
, or the Switch soft key to select Disabled to disable the call forward.
, and the icon
.
46