HP ProLiant DL360 Generation9 Quickspecs page 7

QuickSpecs
Standard Features
Maximum Internal
Storage
Hot Plug SFF SAS SSD 38.4TB
Hot Plug SFF SATA
SSD
Hot Plug SFF SAS
Hot Plug SFF SATA
Hot Plug LFF SAS SSD 6.4TB
Hot Plug LFF SATA
SSD
Hot Plug LFF SAS
Hot Plug LFF SATA
Hot Plug SFF NVMe
PCIe SSD
Power Supply HPE 500W Flex Slot Platinum Hot Plug Power Supply
One of the following
NOTE: Available in 94% efficiency.
depending on model
HPE 800W Flex Slot Platinum Hot Plug Power Supply
NOTE: Also available in 96%.
NOTE: Also available in -48VDC and 227VAC/380VDC power inputs 720480-B21 and 720484-B21
Universal PSU.
HPE 1400W Flex Slot Platinum Plus Hot Plug Power Supply
NOTE: Available in 94% efficiency.
HPE Flexible Slot Battery Backup Unit Kits
NOTE: Flex Slot Battery Backup provides 750W output and 500W in paralleled configuration.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for
hot plug, tool-less installation into HPE ProLiant Gen9 Performance Servers. Flex Slot power supplies are
certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size"
a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall
energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper
cord is also included with each standard AC power supply option kit. If a different power cord is required,
please check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool
located at http://www.hpe.com/info/hppoweradvisor.
Power specifications and technical content for all HPE Server power supplies can be found
at http://www.hp.com/go/proliant/powersupply.
To order additional (single) hard drive blanks, use either:
P/N 666987-B21: HPE SFF Hard Drive Blank Kit or
P/N 666986-B21: HPE LFF Hard Drive Blank Kit.
NOTE: The 2SFF kit comes with cable for internal B140i SATA controller.
For SAS an alternate storage controller and cable kit are required.
CAPACITY CONFIGURATION
10 x 3.84TB
38.4TB 10 x 3.84TB
20.0TB 10 x 2.0TB
20.0TB 10 x 2.0TB
4 x 1.6TB
15.36TB 4 x 3.84TB
40.0TB 4 x 10TB
40.0TB 4 x 10TB
27.36TB 6 x 2.0TB NVMe +
4 x 3.84TB SFF SSD
HPE ProLiant DL360 Generation9 (Gen9)
Page 7