HP ProLiant DL360 Generation9 Quickspecs page 27

QuickSpecs
Configuration Information - Factory Integrated Models
BIOS Mode
HP Legacy FIO Mode Setting
NOTE: If selected, then B140i will not be supported and can no longer be a primary
controller therefore, SAS internal controller must be selected to be the primary controller
Controller State
HP FIO Enable B140i Setting
NOTE: Must be selected when B140i is used as the primary controller and RAID is desired.
HP Mfg FIO Enable HBA Mode Setting
NOTE: When selected if H240ar/H240 are used as the primary controller then RAID is not
allowed.
HPE Insight HP Insight Control including 1yr 24x7 support ProLiant ML/DL/BL-bundle Single Server FIO
License
Software
HP Insight Control including 1yr 24x7 support ProLiant ML/DL/BL-bundle Single Server FIO
E-LTU
HPE Converged HPE OneView Advanced (with HPE iLO Advanced)
Infrastructure
HP OneView for ProLiant DL Server incl 3yr 24x7 Supp FIO Bundle Physical 1 Svr Lic
Software
HPE OneView Advanced (without HPE iLO Advanced)
HP OneView w/o iLO including 3yr 24x7 Support FIO 1 Server LTU
Step 4: Choose Additional Options for Factory Integration from Core and Additional Options
Sections below.
CAUTION:
required for all Rack Server installations. Please refer to your installation instructions for
proper tools and number of people to use for any installation
Hewlett Packard Enterprise recommends that a minimum of two people are
HPE ProLiant DL360 Generation9 (Gen9)
758959-B22
784308-B21
792962-B21
C6N36A
C6N36ABE
E5Y43A
P8B31A
Page 27