Programming The Amax Panel With A Text Keypad; Installer Menu - Bosch AMAX panel 2100 Quick Installation Manual

12 en | Programming and operating the AMAX panel
Exiting a Menu
4
Confirming the Input
4
Switching between Settings
4
Operating a Menu
1.
2.
Exiting the Programming Menu
1.
2.
It is optional to save or not to save the programming data.
1.
2.
5.4

Programming the AMAX panel with a text keypad

5.4.1

Installer menu

The following graphics show an overview of the installer menu structure displayed on a text
keypad.
2016.05 | 06 | F.01U.309.297
Press [–] to get back to the previous menu.
Press [#] to confirm the input.
Press and hold [*] for 3 seconds to switch between settings.
Operate according to the menu prompt.
Select the menu and enter data for specific programming items according to the display
on the keypad to complete the programming, step by step.
Press [#] to confirm each step.
Complete all programming input by repeating the programming steps above and press [–]
to get back to the current main menu level by level.
Press [–] to get to the EXIT PROG. +SAVE menu.
Select EXIT PROG. +SAVE and press [#] to save the data and to exit the programming
mode.
Select EXIT PROG. UNSAVED and press [#] to exit programming mode without saving
the data.
Quick Installation Guide
AMAX panel
Bosch Sicherheitssysteme GmbH