Paper Tray Selection; Sheet-Feed Analysis Margins Setup; Flat-Bed Analysis Margins Setup; Left And Right Printing Margins Setup - Philips LaserMFD 253118301-A User Manual

Paper tray selection

The Automatic selection can have two meanings
depending on the paper format defined on the paper
trays. The following table describes the different cases.
Default tray
AUTOMATIC
Same paper
format in the
trays
MANUAL
AUTOMATIC The main tray is used.
Different
paper format
MANUAL
in the trays
852 - ADVANCED FCT/SCAN. & PRINT/TRAY
1 Press , enter 852 using the keypad.
2 Select the default paper tray to use, AUTOMATIC
or MANUAL, with the buttons
3 Confirm by pressing the OK button.
4 Quit this menu by pressing the

Sheet-feed analysis margins setup

If you want to, you can offset the lateral margins of the
document to the left or right during the analysis with your
sheet-feed scanner.
853 - ADVANCED FCT/SCAN. & PRINT/ S.F.
1 Press , enter 853 using the keypad.
2 Setup the left / right margins offsets (by 0.5 mm
steps) with the buttons
3 Confirm by pressing the OK button.
4 Quit this menu by pressing the

Flat-bed analysis margins setup

If you want to, you can offset the lateral margins of the
document to the left or right during the analysis with your
flat-bed scanner.
854 - ADVANCED FCT/SCAN. & PRINT/
1 Press , enter 854 using the keypad.
2 Setup the left / right margins offsets (by 0.5 mm
steps) with the buttons
3 Confirm by pressing the OK button.
4 Quit this menu by pressing the
Tray used for copy
Selection between the
main tray and the
manual tray.
The manual tray is
used.
The manual tray is
used.
PAPER
and .
button.
MARGINS
and .
button.
FLATBED MARG
and .
button.
- 22 -

Left and right printing margins setup

If you want to, you can offset the lateral margins of the
document to the left or right during printing.
855 - ADVANCED FCT/SCAN. & PRINT/
1 Press , enter 855 using the keypad.
2 Setup the left / right margins offsets (by 0.5 mm
steps) with the buttons
3 Confirm by pressing the OK button.
4 Quit this menu by pressing the

Top and bottom printing margins setup

If you want to, you can offset the lateral margins of the
document towards the top or the bottom during printing.
856 - ADVANCED FCT/SCAN. & PRINT/TOP
1 Press , enter 856 using the keypad.
2 Setup the top / bottom margins offsets (by 0.5 mm
steps) with the buttons
3 Confirm by pressing the OK button.
4 Quit this menu by pressing the

Format paper setup

This menu allows you to define the default paper format
of the manual tray and the main tray. You can also setup
the default scanning width.
857 - ADVANCED FCT/SCAN. & PRINT/
1 Press , enter 857 using the keypad.
2 Select the paper tray for which you want to define
a default paper format with the buttons
3 Confirm by pressing the OK button.
4 Choose the paper format with the buttons
according to the following table:
Paper tray
MAN. TRAY A5, Statement, A4, Legal and Letter
AUTO. TRAY A5, Statement, A4, Legal and Letter
SCANNER LTR/LGL and A4
5 Confirm by pressing the OK button.
6 Quit this menu by pressing the
LFF6050
PRINTER MARG
and .
button.
PRINT.
and .
button.
PAPER FORMAT
and
or
Available paper format
button.
.