Pc Printing Via Wlan Connection; Firmware Update - Philips LaserMFD 253118301-A User Manual

PC printing via WLAN connection

Issue encountered
Paper empty
No paper feed
Paper jam
Paper format problem
Toner empty
Pause requested
from the spooler
Loss of WLAN
connection
Print request handling
Once the problem is resolved,
printing resumes from the first
non-printed page.
Once the problem is resolved,
printing resumes from the first
non-printed page.
Exception: If the document
was to be printed in manual
duplex mode, the printing of
the document is cancelled.
The printing of the active
document is cancelled.
Documents waiting to be
printed, however, will be
printed.
or
Printing resumes from the
first non-printed page.
The machine switches to idle
mode after a timeout (30
seconds by default).
The printing of the active
document is cancelled.
Documents waiting to be
printed, however, will be
printed.
Once the problem is resolved,
the printing of the document
restarts from the beginning,
regardless of the number of
pages already printed before
the connection loss.

Firmware update

Updating the machine firmware requires that the
Companion Suite Pro software be installed on your PC,
and that the PC is connected to the machine (see PC
Features, page 52).
Visit our website www.sagem-communications.com to
check if firmware updates are available for your machine,
and download the appropriate update file on your PC.
Then, access the update utility (S
> C S
OMPANION UITE
> C - F
OMPANION IRMWARE
downloaded file and launch the update.
Please check www.sagem-communications.com for new
versions of this manual after the software is updated.
- 78 -
LFF6050
> A P
TART LL ROGRAMS
> C S P
OMPANION UITE
U ), select
PDATE
LL2
RO
the