Resetting The Camera; Hp Image Zone Software - HP Photosmart M417 User Manual

Resetting the Camera

If your camera does not respond when you press any
buttons, try resetting the camera as follows:
1. Turn off the camera.
2. If you have an optional memory card installed, remove it.
(Although removing an optional memory card is not
necessary for performing the reset, it eliminates the
memory card as a possible cause of the problem.)
3. Remove all power (batteries and AC power) from the
camera for at least 5 seconds.
4. Reinsert the batteries and close the Battery/Memory card
door, and/or reconnect the HP AC power adapter to the
camera.
5. After verifying that the camera works without an optional
memory card, reinsert the card, if you have one.
When you reset the camera, the camera settings will return
to the factory defaults. Any images stored in memory will
be retained.

HP Image Zone Software

The HP Image Zone software provides several features that
enhance your camera's capabilities. With the full version of
the HP Image Zone software, you can use HP Instant Share
to e-mail images to addresses you specify (including
distribution lists), create online albums, or print images
automatically when you connect your camera to your
computer (see Transferring Images to a Computer on
page 79).
HP Photosmart M417/M517 User's Manual
96