Siemens ET 200SP Operating Instructions Manual page 5

Current manual release on the Internet
You will also find the current version of this manual on the Internet pages of Siemens
Industry Online Support under at the following addresses:
● CP 1542SP-1 / CP 1543SP-1
Link: (https://support.industry.siemens.com/cs/ww/en/ps/22144/man)
● CP 1542SP-1 IRC
Link: (https://support.industry.siemens.com/cs/ww/en/ps/22143/man)
Cross references
In this manual there are often cross references to other sections.
To be able to return to the initial page after jumping to a cross reference, some PDF readers
support the command <Alt>+<Left arrow>.
Sources of information and other documentation
You will find an overview of further reading and references in the Appendix of this manual.
License conditions
Note
Open source software
Read the license conditions for open source software carefully before using the product.
You will find license conditions in the following document on the supplied data medium:
● OSS_CP-ET200SP_86.pdf
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens' products and solutions only form one element of such a concept.
Customer is responsible to prevent unauthorized access to its plants, systems, machines
and networks. Systems, machines and components should only be connected to the
enterprise network or the internet if and to the extent necessary and with appropriate security
measures (e.g. use of firewalls and network segmentation) in place.
Additionally, Siemens' guidance on appropriate security measures should be taken into
account. For more information about industrial security, please visit
Link: (http://www.siemens.com/industrialsecurity)
Siemens' products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends to apply product updates as soon as available and to
CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1
Operating Instructions, 01/2017, C79000-G8976-C426-03
Preface
5