Siemens ET 200SP Operating Instructions Manual page 61

Format (memory Data point type
requirements)
Integer (32 bits) Counter Static
Frozen Counter
Counter Event
Frozen Counter Event
Analog Input
Analog Input Event
Analog Output Status
Analog Output
Analog Output Event
Floating-point number Analog Input
(32 bits)
Analog Input Event
Analog Output Status
Analog Output
Analog Output Event
Floating-point number Analog Input
(64 bits)
Analog Input Event
Analog Output
Analog Output Event
Block of data (1...64 Octet String / Octet
bytes) String Output
5)
Octet String Event
This object group can be configured in the Data point editor of STEP 7 using the substitute object group 12.
1)
This object group can be configured in the Data point editor of STEP 7 using the substitute object group 20.
2)
This object group can be configured in the Data point editor of STEP 7 using the substitute object group 22.
3)
This object group can be configured in the Data point editor of STEP 7 using the substitute object group 41.
4)
With these data point types, contiguous memory areas up to a size of 64 bytes can be transferred. All S7 data types with
5)
a size between 1 and 64 bytes are compatible.
Explanation of the table footnotes
groups
The initial data point types of the following object groups can be configured using the
substitute object groups listed above:
● 10 [2]
● 11 [1, 2]
● 21 [1, 2, 5, 6]
● 23 [1, 2, 5, 6]
● 40 [1, 2, 3]
● 42 [1, 2, 4, 5, 6, 7, 8]
To configure the DNP3 CP, use the specified substitute object group.
CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1
Operating Instructions, 01/2017, C79000-G8976-C426-03
DNP3 object group
[variations]
20 [1]
21 [1, 5]
2)
22 [1, 5]
23 [1, 5]
3)
30 [1]
32 [1]
40 [1, 3]
4)
41 [1]
42 [1]
4)
30 [5]
32 [5, 7]
40 [3]
4)
41 [3]
42 [5, 7]
4)
30 [6]
32 [6, 8]
41 [4]
42 [6, 8]
4)
110 [ - ]
111 [ - ]
5)
, , ,
1) 2) 3)
4.5 Telecontrol communication (CP 1542SP-1 IRC)
Direction S7 data types
in UDInt, DWord
in
in UDInt, DWord
in
in DInt
in DInt
out
out DInt
out
in Real
in Real
out
out Real
out
in LReal
in LReal
out LReal
out
in, out
in, out
: Configuring data points using substitute object
4)
Configuration and operation
Operand area
I, Q, M, DB
I, Q, M, DB
Q, M, DB
Q, M, DB
Q, M, DB
Q, M, DB
Q, M, DB
Q, M, DB
Q, M, DB
Q, M, DB
Q, M, DB
DB
5)
DB
5)
61