Verifying The Vpc Configuration - Cisco nexus 5000 series Configuration Manual

Verifying the vPC Configuration

Verifying the vPC Configuration
Use the following commands to display vPC configuration information:
Command
switch# show feature
switch# show port-channel capacity
switch# show running-config vpc
switch# show vpc brief
switch# show vpc consistency-parameters
switch# show vpc peer-keepalive
switch# show vpc role
switch# show vpc statistics
For information about the switch output, see the Command Reference for your Cisco Nexus Series switch.
Viewing the Graceful Type-1 Check Status
This example shows how to display the current status of the graceful Type-1 consistency check:
switch# show vpc brief
Legend:
vPC domain id
Peer status
vPC keep-alive status
Configuration consistency status: success
Per-vlan consistency status
Type-2 consistency status
vPC role
Number of vPCs configured
Peer Gateway
Dual-active excluded VLANs
Graceful Consistency Check
vPC Peer-link status
Cisco Nexus 5000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.1(3)N1(1)
138
(*) - local vPC is down, forwarding via vPC peer-link
: 10
: peer adjacency formed ok
: peer is alive
: success
: success
: secondary
: 34
: Disabled
: -
: Enabled
Configuring Virtual Port Channels
Purpose
Displays whether vPC is enabled or not.
Displays how many EtherChannels are configured
and how many are still available on the switch.
Displays running configuration information for vPCs.
Displays brief information on the vPCs.
Displays the status of those parameters that must be
consistent across all vPC interfaces.
Displays information on the peer-keepalive messages.
Displays the peer status, the role of the local switch,
the vPC system MAC address and system priority,
and the MAC address and priority for the local vPC
switch.
Displays statistics on the vPCs.
This command displays the vPC statistics
Note
only for the vPC peer device that you are
working on.
OL-25842-01