Verifying The Load-Balancing Outgoing Port Id - Cisco nexus 5000 series Configuration Manual

Configuring Port Channels
Command
show interface port channelchennal-number
show feature
show resource
show lacp {counters | interface type slot/port |
neighbor | port-channel | system-identifier}
show port-channel compatibility-parameters
show port-channel database [interface
port-channel channel-number]
show port-channel summary
show port-channel traffic
show port-channel usage
show port-channel database
show port-channel load-balance

Verifying the Load-Balancing Outgoing Port ID

Command Guidelines
The show port-channel load-balance command allows you to verify which ports a given frame is hashed to
on a port channel. You need to specify the VLAN and the destination MAC in order to get accurate results.
Certain traffic flows are not subject to hashing such as when there is a single port in a port-channel.
Note
To display the load-balancing outgoing port ID, perform one of the tasks:
Command
switch# show port-channel load-balance
forwarding-path interface port-channel
port-channel-id vlan vlan-id dst-ip src-ip dst-mac
src-mac l4-src-port port-id l4-dst-port port-id
OL-25842-01
Cisco Nexus 5000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.1(3)N1(1)
Verifying the Load-Balancing Outgoing Port ID
Purpose
Displays the status of a port channel interface.
Displays enabled features.
Displays the number of resources currently available
in the system.
Displays LACP information.
Displays the parameters that must be the same among
the member ports in order to join a port channel.
Displays the aggregation state for one or more
port-channel interfaces.
Displays a summary for the port channel interfaces.
Displays the traffic statistics for port channels.
Displays the range of used and unused channel
numbers.
Displays information on current running of the port
channel feature.
Displays information about load-balancing using port
channels.
Purpose
Displays the outgoing port ID.
99