Viewing An Interface-Specific Type-1 Inconsistency - Cisco nexus 5000 series Configuration Manual

Viewing an Interface-Specific Type-1 Inconsistency

vPC status
----------------------------------------------------------------------------
id
------ ----------- ------ ----------- -------------------------- -----------
20
30
Viewing an Interface-Specific Type-1 Inconsistency
When an interface-specific Type-1 inconsistency occurs, the vPC port on the secondary switch is brought
down while the primary switch vPC ports remain up.The following example shows this type of inconsistency
when there is a switchport mode mismatch.
This example shows how to display the status of the suspended vPC VLAN on the secondary switch:
switch(config-if)# show vpc brief
Legend:
vPC domain id
Peer status
vPC keep-alive status
Configuration consistency status: success
Per-vlan consistency status
Type-2 consistency status
vPC role
Number of vPCs configured
Peer Gateway
Dual-active excluded VLANs
Graceful Consistency Check
vPC Peer-link status
---------------------------------------------------------------------
id
--
1
vPC status
----------------------------------------------------------------------------
id
------ ----------- ------ ----------- -------------------------- -----------
20
30
This example shows how to display the inconsistent status (the VLANs on the primary vPC are not suspended)
on the primary switch:
switch(config-if)# show vpc brief
Legend:
vPC domain id
Peer status
vPC keep-alive status
Configuration consistency status: success
Per-vlan consistency status
Type-2 consistency status
vPC role
Number of vPCs configured
Peer Gateway
Dual-active excluded VLANs
Graceful Consistency Check
vPC Peer-link status
---------------------------------------------------------------------
Cisco Nexus 5000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.1(3)N1(1)
140
Port Status Consistency Reason
Po20 up failed
Po30 up failed
(*) - local vPC is down, forwarding via vPC peer-link
Port Status Active vlans
---- ------ --------------------------------------------------
Po1 up 1
Port Status Consistency Reason
Po20 up success
Po30 down* failed
(*) - local vPC is down, forwarding via vPC peer-link
Global compat check failed 1-10
Global compat check failed 1-10
: 10
: peer adjacency formed ok
: peer is alive
: success
: success
: secondary
: 2
: Disabled
: -
: Enabled
success
Compatibility check failed -
for port mode
: 10
: peer adjacency formed ok
: peer is alive
: success
: success
: primary
: 2
: Disabled
: -
: Enabled
Configuring Virtual Port Channels
Active vlans
Active vlans
1
OL-25842-01