Cisco nexus 5000 series Configuration Manual page 312

Verifying the Chassis Management Information
Power Supply Fex 101:
---------------------------------------------------------------------------
Voltage: 12 Volts
-----------------------------------------------------
PS Model
-----------------------------------------------------
1 --
2 NXK-PAC-400W
Mod Model
--- -------------------
1 N2K-C2248TP-1GE
Power Usage Summary:
--------------------
Power Supply redundancy mode:
Total Power Capacity
Power reserved for Supervisor(s)
Power currently used by Modules
Total Power Available
This example shows how to display the SPROM for a specific Fabric Extender:
switch# show sprom fex 101 all
DISPLAY FEX 101 SUP sprom contents
Common block:
Block Signature : 0xabab
Block Version
Block Length
Block Checksum
EEPROM Size
Block Count
FRU Major Type
FRU Minor Type
OEM String
Product Number
Serial Number
Part Number
Part Revision
Mfg Deviation
H/W Version
Mfg Bits
Engineer Use
snmpOID
Power Consump
RMA Code
CLEI Code
VID
Supervisor Module specific block:
Block Signature : 0x6002
Block Version
Block Length
Block Checksum
Feature Bits
HW Changes Bits : 0x0
Card Index
MAC Addresses
Number of MACs
Number of EPLD
Port Type-Num
Sensor #1
Sensor #2
Cisco Nexus 5000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.1(3)N1(1)
292
Power Power
(Watts) (Amp)
-- --
4.32 0.36
Power Power
Requested Requested
(Watts) (Amp)
------- ----------
0.00 0.00
: 3
: 160
: 0x1a1e
: 65535
: 3
: 0x6002
: 0x0
: Cisco Systems, Inc.
: N2K-C2248TP-1GE
: JAF1339BDSK
: 73-12748-01
: 11
: 0
: 0.103
: 0
: 0
: 9.12.3.1.9.78.3.0
: 1666
: 0-0-0-0
: XXXXXXXXXTBDV00
: V00
: 2
: 103
: 0x2686
: 0x0
: 11016
: 00-00-00-00-00-00
: 0
: 0
: 1-48;2-4
: 60,50
: 60,50
Configuring the Fabric Extender
Status
--
ok
Power Power Status
Allocated Allocated
(Watts) (Amp)
--------- ---------- ----------
0.00 0.00 powered-up
redundant
4.32 W
0.00 W
0.00 W
-------------
4.32 W
-------------
OL-25842-01