Disabling Vpcs - Cisco nexus 5000 series Configuration Manual

Configuring Virtual Port Channels
Command or Action
Step 4
switch# copy running-config startup-config
This example shows how to enable the vPC feature:
switch# configure terminal
switch(config)# feature vpc

Disabling vPCs

You can disable the vPC feature.
Note When you disable the vPC feature, the Cisco Nexus device clears all the vPC configurations.
SUMMARY STEPS
1. switch# configure terminal
2. switch(config)# no feature vpc
3. (Optional) switch# show feature
4. (Optional) switch# copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 switch# configure terminal
Step 2 switch(config)# no feature vpc
Step 3 switch# show feature
Step 4 switch# copy running-config startup-config
This example shows how to disable the vPC feature:
switch# configure terminal
switch(config)# no feature vpc
OL-25842-01
(Optional)
Copies the running configuration to the startup configuration.
Cisco Nexus 5000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.1(3)N1(1)
Purpose
Purpose
Enters global configuration mode.
Disables vPCs on the switch.
(Optional)
Displays which features are enabled on the switch.
(Optional)
Copies the running configuration to the startup configuration.
Disabling vPCs
117