Cisco Nexus 5000 Series Nx-Os Layer 2 Switching Configuration Guide, Release 5.1(3)N1(1 - Cisco nexus 5000 series Configuration Manual

Viewing a Per-VLAN Consistency Status
Dual-active excluded VLANs
Graceful Consistency Check
vPC Peer-link status
---------------------------------------------------------------------
id Port
-- ----
1 Po1
vPC status
----------------------------------------------------------------------------
id
------ ----------- ------ ----------- -------------------------- -----------
20
30
This example shows how to display the per-VLAN consistency status as Failed on the primary switch:
switch(config)# show vpc brief
Legend:
vPC domain id
Peer status
vPC keep-alive status
Configuration consistency status: success
Per-vlan consistency status
Type-2 consistency status
vPC role
Number of vPCs configured
Peer Gateway
Dual-active excluded VLANs
Graceful Consistency Check
vPC Peer-link status
---------------------------------------------------------------------
id Port
-- ----
1 Po1
vPC status
----------------------------------------------------------------------------
id
------ ----------- ------ ----------- -------------------------- -----------
20
30
This example shows the inconsistency as STP Disabled:
switch(config)# show vpc consistency-parameters vlans
Name
-------------
STP Mode
STP Disabled
STP MST Region Name
STP MST Region Revision
STP MST Region Instance to
VLAN Mapping
STP Loopguard
STP Bridge Assurance
STP Port Type, Edge
BPDUFilter, Edge BPDUGuard
STP MST Simulate PVST
Pass Vlans

Cisco Nexus 5000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.1(3)N1(1)

142
Status Active vlans
------ --------------------------------------------------
up 1-4,6-10
Port Status Consistency Reason
Po20 up success
Po30 up success
(*) - local vPC is down, forwarding via vPC peer-link
Status Active vlans
------ --------------------------------------------------
up 1-4,6-10
Port Status Consistency Reason
Po20 up success
Po30 up success
Type
----
1
1
1
1
1
1
1
1
1
-
: -
: Enabled
success
success
: 10
: peer adjacency formed ok
: peer is alive
: failed
: success
: primary
: 2
: Disabled
: -
: Enabled
success
success
Reason Code
---------------------- -----------------------
success
vPC type-1
configuration
incompatible - STP is
enabled or disabled on
some or all vlans
success
success
success
success
success
success
success
Configuring Virtual Port Channels
Active vlans
1-4,6-10
1-4,6-10
Active vlans
1-4,6-10
1-4,6-10
Pass Vlans
0-4095
0-4,6-4095
0-4095
0-4095
0-4095
0-4095
0-4095
0-4095
0-4095
0-4,6-4095
OL-25842-01