Removing An Inherited Port Profile - Cisco nexus 5000 series Configuration Manual

Port Profiles
Command or Action
Step 6
copy running-config startup-config
Example:
switch(config)# copy running-config startup-config
This example shows how to inherit the port profile named adam onto the port profile named test:
switch# configure terminal
switch(config)# port-profile test
switch(config-ppm)# inherit port-profile adam
switch(config-ppm)#
This example shows how to add the interface commands to a port profile named ppEth configured for Ethernet
interfaces:
switch# configure terminal
switch(config)# port-profile ppEth
switch(config-port-prof)# switchport mode trunk
switch(config-port-prof)# switchport trunk allowed vlan 300-400
switch(config-port-prof)# flowcontrol receive on
switch(config-port-prof)# speed 10000
switch(config-port-prof)#
This example shows how to inherit a port profile named ppEth configured for Ethernet interfaces into an
existing port profile named test:
switch# configure terminal
switch(config)# port-profile test
switch(config-port-prof)# inherit port-profile ppEth
switch(config-port-prof)#
This example shows how to assign a port profile named ppEth configured for Ethernet interfaces to a range
of Ethernet interfaces:
switch# configure terminal
switch(config)# interface ethernet 1/2-5
switch(config-if)# inherit port-profile ppEth
switch(config-if)#
This example shows how to remove an inherited port profile named ppEth from an existing port profile named
test:
switch# configure terminal
switch(config)# port-profile test
switch(config-port-prof)# no inherit port-profile ppEth
switch(config-port-prof)#

Removing an Inherited Port Profile

You can remove an inherited port profile.
Cisco Nexus 5000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.1(3)N1(1)
28
Configuring Ethernet Interfaces
Purpose
(Optional)
Copies the running configuration to the startup
configuration.
OL-25842-01