Presser Foot Lifter Stopper Position - ELNA eXpressive920 Service Manual

Presser foot lifter stopper position (adjustment)
Presser foot lifter button
Needle bar
View from the face cover side
Mechanical Adjustment
Presser foot lifter
stopper
Hexagonal socket
screw
Presser foot lifter
stopper
39.6 mm
Presser foot spring
release base
39
To adjust:
1. Turn the power switch on. Press the presser foot lifter
button to lower the presser foot. Turn the power switch off.
2. Turn the handwheel toward you to lower the needle.
Raise the presser foot lifter.
3. Loosen the hexagonal socket screw (use an Allen wrench
of 2 mm width across flats) of the presser foot lifter
stopper from the front side of the machine.
4. Adjust the distance between the presser foot spring release
base and the presser foot lifter stopper to 39.6 mm.
Tighten the hexagonal socket screw.
5. Adjust the needle threader hook position (see page 29).