Cloth Guide Start Position - ELNA eXpressive920 Service Manual

Cloth guide start position

The distance between the cloth guide and center needle position should be 15 mm when the cloth guide is at the start position.
Reverse
stitch button
Start/Stop button
X value
Cloth guide
15 mm
Center needle position
Mechanical Adjustment
46
1. Turn the power switch off. Attach the embroidery unit.
(Do not open the Y-carriage.)
2. Attach the cloth guide to the embroidery carriage.
3. Turn the power switch ON while pressing the Start/Stop
button and the Reverse stitch button to enter the factory
setting mode.
Press "Cloth Guide" key.
4. Press " " key.
5. The cloth guide moves to the start position, and the initial
X value 1950 is indicated.
5. Press " " key or "
position 15 mm away from the center needle position.
NOTE: Adjustable range is from 1900 to 2000.
6. Press "OK" key.
" to move the cloth guide to the