Printed Circuit Board F - ELNA eXpressive920 Service Manual

Replacing Electronic Components
Sticky tape
Connector A
Setscrews

Printed circuit board F

To remove:
1. Remove the front cover (see page 5).
2. Disconnect the connector A from the circuit board K.
Remove the sticky tapes (2 places).
Printed circuit
board F
3. Remove the setscrews (2 pcs), and the circuit board F.
To attach:
1. Follow the above procedure in reverse.
2. Fix the connector cords with sticky tapes (Sekisui Chemical
Polyesper Type 900 or 3M 44D-A Electrical Tape)
12