MAC TOOLS MDT 10 Operator's Manual page 91

Tune Up Specifications
Provides specifications for specific components when a tune up is performed.
1. Select Tune Up Specs from the Diagnostic Information screen.
2. Some of the tune up specifications contained in this section include the following:
• Starter
• Generator
• Regulator
• Spark plug
• Idle speed
• Fuel pressure
• Compression
• Firing order
Key Programming
Displays instructions for the selected vehicle for programming a key.
1. Select Key Programming from the Diagnostic Information screen.
2. Follow the prompts on the screen to program a key and or replace battery in key.
800.MACTOOLS
ss02519
Current
Tune Up Specs
2004
Injector
Ford
Starter
Regulator
Timing
Spark Plug
Firing Order
Battery
ss02520
Current
Key Programming
2004
Remote Alarm/Central Locking
Battery Location
Ford
Battery Replacement
Immobilizer
fig107944
1 1
2 2 4
3 3
Specification: 11 to 18 Ohms
System Operation
Pressing the LOCK button once locks all doors and activates the alarm system (if fitted).
Pressing the LOCK button twice within 3 seconds confirms all doors locked by sounding the horn once.
The horn will sound twice if a door is open
Pressing the UNLOCK button once deactivates the alarm system (if fitted) and unlocks the driver's door
only.
Pressing the UNLOCK button twice within 3 seconds deactivates the alarm system (if fited) and unlocks
all doors.
Pressing the panic button once activates the panic alarm. The horn will sound and the parking lamps will
flash
Pressing the panic button agiain, of turning ignition ON deactivates the panic alarm.
Programming
When
Remote transmitter added or replaced.
System Malfunction.
How
Obtain all remote transmitters.
Switch ignition from OFF to ON 8 times within 10 seconds:
Doors should lock then unlock.
Within 20 seconds:
Press any button on the first remote transmitter.
Doors should lock then unlock.
91