Data Stream; Overview - MAC TOOLS MDT 10 Operator's Manual

DATA STREAM

Overview

The data stream function shows live sensor and solenoid data streaming from the vehicle ECU (electronic
control unit). Connect the VCI with the vehicle at key on engine off or key on engine running to see live dynamic
data, instead of static live data. Each data item has a selection checkbox and a display format menu.
Basic Data Stream Procedure
1. From the home screen, select Data Stream.
2. If the vehicle is NOT a Volkswagen/Audi then go to step 5.
3. Follow the prompts on the screen. Select or customize a group.
Data Groups
• Data groups may be selected at any time within data stream.
• Select the data group menu button from the top of the screen.
• Scroll through the menu until the desired data group is found, then select it.
Note: It is possible to change controllers while in data stream.
• Select the controller selection button.
• Select the desired controller.
• Once controller is selected, select the data group menu button.
• Select the desired data group.
68
ss02476
Active
Search Google for ...
CHECK
Read DTCs
BMW
2013
BMW
335I (E92/E93)
Maintenance Tests
xDrive3.0
TIRE PRESSURE
MONITOR
CHECK
Automated System
OBD-II
Tue, 10 May 2016
Select Vehicle
ss02477
Current
1001
101001 Data Stream
0101
2008
All Data Groups
All Data Groups
Audi
Search all Data Streams
Volkswagen/Audi Group
Volkswagen/Audi Group
System Status
Ignition
System Status
Knock Control
Ignition
Lambda/Catalytic
Knock Control
Engine Speed/Idle
Lamdba/Catalytic
Throttle Valve
Engine Speed/Idle
Exhaust Reduction
Throttle Valve
Control Module identification
Special 86-89
1001
101001
0101
Data Stream Special Tests
All System DTC
Browser
Scan
View Data Stream
Test Veiw Saved Tests Recordings
2:59
Diagnostic
Information
Settings
System Wiring
Diagrams
Select
Select Customize
Select Customize
Select Customize
Select Customize
Select Customize
Select Customize
Select Customize
MACTOOLS.COM