Vehicle Info - MAC TOOLS MDT 10 Operator's Manual

Vehicle Info

Mode 9 views Vehicle Identification Numbers (VINs), calibration ID(s), and verification number(s).
1. Select Vehicle Info from the Generic OBDII screen.
2. Follow the prompts on the screen.
The 17 digit VIN provides information on the vehicle including year of manufacture, engine and possibly trans-
mission type, vehicle body style, and color.
Mode 9 is not supported on older vehicles, so a visual check of the VIN through the windshield or on the door
sticker would be required to obtain that VIN. Mode 9 is used on the tool to Auto ID the vehicle and for calibra-
tion verification to see if a newer calibration is available for re-flashing the ECU.
42
ss02430
Current
Generic OBDII
READINESS MODE 1
Vehicle Informationation (Mode 9)
DATA STREAM MODE 1
FREEZE FRAME MODE 2
DTC's MODES 3,4,7,A
Make sure the key is ON and the Engine is OFF.
O2 SENSORS MODE 5
NON-CONTINUOUS TESTS
MODE 6
SPECIAL TESTS MODE 8
VEHICLE INFO MODE 9
ss02431
Current
Generic OBDII
READINESS MODE 1
Vehicle Informationation (Mode 9)
DATA STREAM MODE 1
Vehicle Identification Number
FREEZE FRAME MODE 2
Controller
DTC's MODES 3,4,7,A
ENGINE
O2 SENSORS MODE 5
Calibration Identification Number
NON-CONTINUOUS TESTS
Controller
MODE 6
SPECIAL TESTS MODE 8 ENGINE
Calibration Verification Number
VEHICLE INFO MODE 9
Controller
ENGINE
Counters
CANCEL OK
Vehicle Identification Number
1G6DM57N530102274
Calibration Identification Number
BOSCHA1037366956
Calibration Identification Number
4EF7033C
MACTOOLS.COM