MAC TOOLS MDT 10 Operator's Manual page 21

VCI Connection Manager Icon Definitions
No VCI is paired with the handset.
VCI is paired on the hardware level, but software
check had failed. VCI cannot be used without
software update.
VCI is connected via Wi-Fi. Software check is
successful, VCI is ready for use, but Wi-Fi signal
is degraded.
VCI is connected via USB. Software check is
successful, VCI is ready for use.
VCI is connected via Wi-Fi. Software check is
successful, VCI is ready for use.
4. Once VCI Connection Manager icon is selected, VCI Connection Manager dialog is displayed, displaying
discovered VCIs. Select Refresh to rediscover available VCIs if needed.
5. Select "Connect" next to desired VCI. VCI Connection Manager dialog will refresh to show successful
connection.
At this point the icon will change from "No VCI is paired with the handset" to VCI is connected via Wi-Fi
The handset is now paired to a VCI. To use a different VCI in the future, repeat the steps for manually pairing
the VCI.
800.MACTOOLS
VCI Connection Manager icon
ss02401
Active
Search Google for ...
CHECK
Read DTCs
BMW
2013
BMW
335I (E92/E93)
xDrive3.0
Maintenance Tests
TIRE PRESSURE
MONITOR
CHECK
Automated System
OBD-II
Tue, 10 May 2016
Select Vehicle
1001
101001
0101
Data Stream Special Tests
All System DTC
Browser
Scan
View Data Stream
Test Veiw Saved Tests Recordings
2:59
Diagnostic
Information
Settings
System Wiring
Diagrams
21