Selecting Vehicle; Auto Id - MAC TOOLS MDT 10 Operator's Manual

SELECTING VEHICLE

WARNING
Before performing any diagnostic functions, refer to the Safety Precautions and the warnings provided by the vehicle
manufacturer. In addition, follow any warnings and instructions provided on the handset.
Note: Select Demo to generate simulated data for demonstration purposes.
1. Select, Select Vehicle to manually choose the vehicle, AutoID to automatically identify the vehicle or enter
the VIN.
2. Select the vehicle specification options on each screen until the complete vehicle information is entered.

Auto ID

Auto ID uses the vehicle's Mode 9 VIN information, when available. Most vehicles from 2004 and newer sup-
port Auto ID, but some other older vehicles may support Mode 9 too.
Auto ID Operation:
1. Handset must be on and and paired with the VCI which is connected to a vehicle.
2. Select Start Auto ID
3. Once selected the handset will begin communicating with the vehicle.
44
ss02432
Active
Search Google for ...
CHECK
Read DTCs
Maintenance Tests
No Vehicle Selected
CHECK
Automated System
OBD-II
Tue, 10 May 2016
Select Vehicle
ss02433
VEHICLE BAY
RECENT
2008 Chrysler
Enter New Vehicle
Crossfire
Limited 3.2
Start AutoID
ENGINE
?
OBD-II
Heavy Duty
Demo Mode
ON
1001
101001
0101
Data Stream Special Tests
All System DTC
Browser
Scan
View Data Stream
Test Veiw Saved Tests Recordings
FAVORITES
2015 Acura 1999 Chevrolet
ILX C2500 2WD
Base 2.0
TRANSMISSION
2:59
Diagnostic
Information
Settings
System Wiring
Diagrams
SEARCH BY VIN
2003 Cadillac
CTS
LS 5.7 Luxury Sport 3.2
PCM ENGINE
MACTOOLS.COM