Cisco Aironet 340 Series Hardware Installation Manual page 55

Chapter 4 Troubleshooting
Table 4-1
Message
type
Association
status
Operational
Error/warning
Failure
Firmware
upgrade
OL-0738-01
Top Panel Indicator Signals
Radio Status
indicator indicator
Steady
green
Blinking
green
Blinking Steady
green green
Steady
green
Blinking Steady
amber green
Steady
green
Blinking
amber
Steady Steady
red red
Steady
red
Cisco Aironet Access Point Hardware Installation Guide
Checking the Top Panel Indicators
Infrastructure Meaning
indicator
At least one wireless
client device is
associated with the unit
No client devices are
associated; check the
unit's SSID and WEP
settings
Transmitting/receiving
packets over radio
Blinking Transmitting/receiving
green packets over Ethernet
Maximum retries or
buffer full occurred on
the radio
Blinking Transmit/receive errors
amber
Blinking red Ethernet cable is
disconnected
General warning
Steady red Firmware failure;
disconnect power from
the unit and reapply
power
Unit is loading new
firmware
4-3